product
Chlorine Dioxide Gas Detector GT-AEC2232bX-p Fixed Gas Detector – Action
Chlorine Dioxide Gas Detector GT-AEC2232bX-p Fixed Gas Detector – Action Detail:
Technical Parameters
|
Item |
Data |
|
Detected gases |
VOC gases |
|
Sampling mode |
Pump suction |
|
Operating voltage |
DC24±6V |
|
Power consumption |
≤3.5W (DC24V) |
|
Electrical interface |
NPT3/4＂(female) |
|
Protection grade |
IP66 |
|
Explosion proof grade |
ExdⅡCT6Gb |
|
Outer casing |
Stainless steel + cast aluminum (shell: cast aluminum) |
|
Dimension |
Length × width ×thickness: 242.5mm×177mm×87mm |
|
Weight |
About 2.5 kg |
Major Features
Patented compound PID joint detection technology
In order to improve the life of the PID sensor, an innovative mode of dual-sensor joint operation is adopted. The semiconductor detection signal is used as the starting signal of the PID detector to reduce the working time of the PID sensor, so the service life of the PID sensor can be greatly improved (2-5 years);
Patented rainproof and dustproof technology
The new multi-purpose rainproof and dustproof cover gives consideration to rain and dust prevention. It can effectively filter 99% impurities and reduce the blocking probability of pumping device;
Secondary polymer membrane filtration device
It can block the interference gas such as water vapor, so that it can work in complex environments such as high humidity and high salt spray;
Temperature compensation function
Built in high sensitivity temperature sensor, automatically compensate the drift caused by the changes of ambient temperature;
Ceramic electrode PID bulb
Using the latest nano-industry ceramic electrode PID bulb, with high stability and accuracy;
LCD liquid crystal display and three-color backlight
It adopts military-grade LCD liquid crystal has good low temperature performance and display effect (clear display under strong light and long distance), with three-color backlight function to make the alarm state more obvious;
With pump blockage alarm
In order to avoid the blockage of the pumping device caused by various environmental or human factors affecting the gas inlet, the blockage alarm function can prompt the user to deal with it in time;
High protection grade
The protection grade reaches IP66.
Model Selection
|
Model |
Signal output |
Sensor equipped |
Adaptive control system |
|
GQ-AEC2232bX-P |
Three-wire (4~20)mA standard signal and three sets of relay signals
(2 sets of alarm relays and 1 set of fault relay) |
Compound PID sensor |
ACTION control system: ACTION gas alarm controllers: AEC2392a, AEC2392b, AEC2393a , AEC2393b2a-BS, AEC2393b2a-BM |
Model Selection
Boundary Dimension
Material cast aluminum; Dimension: Length× width× height: 242.5mm×177mm×87mm Weight: 2.5 kg
Mounting Mode
A. Horizontal pipe-mounted (Holding pipe diameter DN20, DN50 optional)
B. Vertical pipe-mounted (Holding pipe diameter DN20, DN50 optional)
C. Wall-mounted / Ceiling-mounted
Product detail pictures:
Related Product Guide:
We constantly function like a tangible group to ensure that we can give you the very best high-quality and also the very best cost for Chlorine Dioxide Gas Detector GT-AEC2232bX-p Fixed Gas Detector – Action , The product will supply to all over the world, such as: Chile, Portland, Boston, After years' creating and developing, with the advantages of trained qualified talents and rich marketing experience, outstanding achievements were gradually made. We get good reputation from the customers due to our good solutions quality and fine after-sale service. We sincerely wish to create a more prosperous and flourishing future together with all the friends home and abroad!
By Joanne from Roman - 2018.10.01 14:14
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Sabina from Australia - 2018.11.22 12:28
