Dedicated to strict high-quality management and considerate shopper company, our experienced team associates are normally available to discuss your requirements and ensure full shopper gratification for Factory Free sample Fixed Industrial LPG Gas Leak Detector for Gas Detection, Our workforce members are intention to provides products and solutions with large performance cost ratio to our shoppers, as well as the goal for all of us would be to satisfy our consumers from everywhere in the globe.
Dedicated to strict high-quality management and considerate shopper company, our experienced team associates are normally available to discuss your requirements and ensure full shopper gratification for China Gas Detector and Co, We integrate all our advantages to continuously innovate, improve and optimize our industrial structure and product performance. We are going to always believe in and work on it. Welcome to join us to promote green light, together we will make a better Future!
Item |
Data |
||
Operating voltage |
AC220V±15% (50Hz±1%) |
||
Capacity |
1~4 points |
||
Types of gas detected |
%LEL, 10-6, %VOL and switching value signals |
||
Range |
Combustible gas: max. 100 (%LEL) Toxic gas: max. 9,999 (10-6) Oxygen: max. 100 (%VOL) |
||
Power consumption |
≤10W (excluding supporting equipment) |
||
Load capacity |
the max. output current of a single service circuit 24V ≤300mA |
||
Environmental condition for operating |
Temperature: 0℃~40℃; relative humidity≤93%RH |
||
Alarming mode |
audible-visual alarm |
||
Value indication error |
±5%FS |
||
Alarming error |
±15% of the alarming concentration |
||
Display mode |
nixie tube |
||
Signal transmission |
4~20mA standard signal (three-wire system) |
||
Signal transmission distance |
≤1000m (1.5mm2) |
||
Output |
five sets of relay contact signals, with the capacity of 10A/DC24V or 10A/AC220V RS485 bus interface (standard MODBUS protocol) |
||
Boundary dimensions |
Length × width × thickness: 365mm×220mm×97mm |
||
Gross weight |
about 6kg |
||
Standby power supply |
12VDC/2Ah×2 |
||
Mounting mode |
wall-mounted |
||
Adaptive detectors |
Gas detectors: GT-AEC2232bX, GQ-AEC2232bX, GT-AEC2232aT, AEC2338, GQ-AEC2232bX -P, AEC2338-D Fan linkage box: JB-ZX-AEC2252F Solenoid valve linkage box: JB-ZX-AEC2252B |
● Meet the need of connecting standard 4-20mA current signal detectors at 1-4 point locations;
● With a small size, the product can be wall-mounted easily. Two sets or more can be installed side by side to meet customer’s demands for more point locations (wall mounting of 8, 12, 16 or more point locations can be realized through gapless combination);
● Monitoring and display of real-time concentration (%LEL, 10-6, %VOL) as well as switching value signals of combustible gas, toxic gas and oxygen (default is combustible gas detector. No setting is required. It is available for use after being installed and electrified);
● Each circuit links one switching value output. If necessary, linking programming setting can be realized through the menu. Each product has one RS485 digital interface to communicate with the host computer;
● The visual range is farther and the visual angle is wider. Concentration contains 4 effective digits. Display with an accuracy of 9999~0.001 is available;
● Save the latest 999 alarming records and 999 failure records.
1. Side lock
2. Cover
3. Casing ground
4. User connection terminal
5. User connection terminal
6. Incoming hole
7. Bottom box
8. Power supply terminal
9. Switch of main power supply
10. Switch of standby power supply
11. Switch power supply
12. Standby battery
13. Battery holder
14. Horn
15. Control panel
16. Anti-collision mat
● Make 4 or 6 mounting holes (hole depth: ≥40mm) in a wall according to the requirements for the size among mounting holes (hole symbols 1 – 6) for mounting the hanging plate;
● Insert a plastic expansion bolt into each mounting hole;
● Fix the hanging plate onto the wall and fasten it onto the expansion bolts with 4 or 6 self-tapping screws (ST4.2×25);
● Hang the hanging parts at the bottom of the controller onto location A at the bottom board to complete mounting of the controller.
AEC2392b has 4 sets of branch-line connection terminals that can be connected to the branch-line communication equipment manufactured by the company such as detectors AEC2232b, AEC2232bX, GQ-AEC2232b, GQ-AEC2232bX and AEC2232aT, or other transmitters with 4~20mA signal outputs to monitor and control the gas concentration at site. Meanwhile, remote logical control over external equipment (in-situ audible-visual, solenoid valves and fans, etc.) can be realized through 5 sets of built-in programmable modules. In addition, remote communication with the monitor system can be realized through the RS485 communication interface.
Dedicated to strict high-quality management and considerate shopper company, our experienced team associates are normally available to discuss your requirements and ensure full shopper gratification for Factory Free sample Fixed Industrial LPG Gas Leak Detector for Gas Detection, Our workforce members are intention to provides products and solutions with large performance cost ratio to our shoppers, as well as the goal for all of us would be to satisfy our consumers from everywhere in the globe.
Factory Free sample China Gas Detector and Co, We integrate all our advantages to continuously innovate, improve and optimize our industrial structure and product performance. We are going to always believe in and work on it. Welcome to join us to promote green light, together we will make a better Future!