We stay with the basic principle of “quality initially, services first, steady improvement and innovation to fulfill the customers” for your management and “zero defect, zero complaints” as the quality objective. To perfect our company, we give the goods while using the good high-quality at the reasonable selling price for factory Outlets for Magnetic Float Type Side-Mount Oil/Fuel/Liquid/Water/Diesel/Gas/Gasoline/Propane/Ethanol High and Low Level Alarm Controller, For additional info, you should send out email to us. We’re looking forwards the opportunity to service you.
We stay with the basic principle of “quality initially, services first, steady improvement and innovation to fulfill the customers” for your management and “zero defect, zero complaints” as the quality objective. To perfect our company, we give the goods while using the good high-quality at the reasonable selling price for China Level Sensor and Level Sender, We always adhere to follow the honesty, mutual benefit, common development, after years of development and the tireless efforts of all staff, now has perfect export system, diversified logistics solutions, extensive meet customer shipping, air transport, international express and logistics services. Elaborate one-stop sourcing platform for our customers!
Item |
Data |
Power supply card |
AC176V~AC264V (50Hz±1%) |
Standard configuration (8 circuits) |
one master control card, one power supply card, eight channel cards and one 19’’ standard 3U rack |
Boundary dimension of the standard rack |
length × width × height 450mm×300mm×132.5mm (excluding handrail); 482mm×344mm×132.5mm (including handrail) |
Item |
Master control card |
Channel card |
|
Operating voltage |
DC24V±6V |
||
Power consumption |
3W |
0.5W/ Channel card |
|
Environmental condition for operating |
Temperature-10℃~+50℃; relative humidity≤93%RH; atmospheric pressure 86kPa~106kPa |
||
Input signals |
Connect to (4~20)mA standard current signals or passive switching value signals via a channel card |
(4~20)mA standard current signals or passive switching value signals |
|
Signal transmission distance |
1500m (1.5mm2) |
||
Types of gas detected |
%LEL/%VOL/ppm |
||
Operating mode |
Working with channel cards |
Connected to the master control card or working independently |
|
Capacity |
Connecting eight channel cards (expandable to 34 points) |
One channel card connects one circuit of input |
|
Adaptive equipment |
Gas detectors: GT-AEC2232bX, GQ-AEC2232bX, GT-AEC2232aT, AEC2338, GQ-AEC2232bX –P, AEC2338-D Fan linkage box: JB-ZX-AEC2252F Solenoid valve linkage box: JB-ZX-AEC2252BFlame detectors, smoke/heat detectors and manual alarm buttons, etc. | ||
Output signals |
1. RS485 bus communication signal (standard MODBUS protocol);2. Signals of 2 sets of relays (failure and alarm); contact capacity: AC220V/5A or DC24V/5A | One channel card can output:1. One set of (4~20)mA current signal;2. Signals of 3 sets of relays (high alarm, low alarm and failure); contact capacity: AC220V/5A or DC24V/5A | |
Alarm setting |
Low alarm and high alarm |
low alarm and high alarm |
|
Alarming mode |
Audible-visual alarm |
Visual alarm |
|
Display mode |
LCD Chinese display |
LED digital display |
|
Mounting mode |
Standard 19” cabinet panel mounting |
||
Optional |
Standby power supply DC12V/7Ah×2 lead-acid battery (external case) |
||
Blind plate | length × width: 129.5mm×35.2mm |
● The 19” cabinet standard 3U panel-mounted all-metal structure can prevent EMI/RFI interference. Due to an independent plug-in card design, optional channel cards, master control cards and power supply cards can be used as required to set up a gas monitoring system with up to 1,000 point locations;
● The master control card is characterized by LCD Chinese display and character menu operation. It can monitor the system’s concentration, alarm and failure statuses. It can also be used to set and search various parameters. It can set system time, range (%LEL, ppm and %VOL), three alarm types, alarm concentration, password, and operating authorization and search up to 999 alarm and failure records and 100 startup/shutdown records;
● The master control card’s RS485 bus communication interface, equipped with a standard MODBUS protocol, can communicate with the host control systems and connect fire and gas systems to improve the system integration level;
● Channel cards can receive 4-20mA signal or switching value signal input and be connected with various devices, including combustible gas detectors, toxic and hazardous gas detectors, oxygen detectors, flame detectors, smoke/heat detectors and manual alarming buttons, etc.;
● With a LED display accuracy of 0.000-9999, channel cards can monitor external equipment’s concentration, alarm and failure statuses on a real-time basis and communicate with the master control card. Channel cards can also work independently and be used to set parameters of detectors. Thus, failure of the master control card or failure of other channel cards will not have an impact on channel cards’ gas monitoring;
● Channel cards’ multiple output types are applicable to linkage of various on-site external control devices, good for integration of the host control system;
● Power supply cards supply DC24V power supply to internal devices of the host computer and on-site devices (in case of higher capacity, use special-purpose firefighting power supply).
1. 19” standard 3U rack
2. 4×φ7.5 mounting hole
3. Handle
4. Channel card
5. Channel card LED window
6. Screw
7. Lock switch of the standby power supply
8. Lock switch of the main power supply
9. Power supply card
10. Master control card
11. Master control card LCD panel
Connection terminals:
Master control card:
NO (normally open) and COM (common): (2 sets) output terminals for relay external control signals output terminals
A+, PGND and B-: RS485 communication interface connection terminals
Power supply card:
L, PE and N: AC220V power supply terminals
B+ and GND: connection terminals of standby power supply
Channel card:
F1+ and F2-: connection terminals for relay signal output in case that a detector is faulty
LA1+ and LA2-: connection terminals for relay signal output in case that a detector gives a low alarm
HA1+ and HA2-: connection terminals for relay signal output in case that a detector gives a high alarm
GND and 4~20mA (OUT): (4~20) mA signal output terminals
GND, 4~20mA (IN) and +24V: input terminals for (4~20) mA or passive switching value signals
Internal terminal: no operation required
B and A: Connection terminals for internal communication
GND and 24V-IN: DC24 power supply terminals
We stay with the basic principle of “quality initially, services first, steady improvement and innovation to fulfill the customers” for your management and “zero defect, zero complaints” as the quality objective. To perfect our company, we give the goods while using the good high-quality at the reasonable selling price for factory Outlets for Magnetic Float Type Side-Mount Oil/Fuel/Liquid/Water/Diesel/Gas/Gasoline/Propane/Ethanol High and Low Level Alarm Controller, For additional info, you should send out email to us. We’re looking forwards the opportunity to service you.
factory Outlets for China Level Sensor and Level Sender, We always adhere to follow the honesty, mutual benefit, common development, after years of development and the tireless efforts of all staff, now has perfect export system, diversified logistics solutions, extensive meet customer shipping, air transport, international express and logistics services. Elaborate one-stop sourcing platform for our customers!