China Factory Outlets Multi Gas Detector - GT-AEC2335 AC220V Powered Fixed Gas Detector – Action manufacturers and suppliers

Factory Outlets Multi Gas Detector - GT-AEC2335 AC220V Powered Fixed Gas Detector – Action

Short Description:

ACTION gas detectors are OEM & ODM supported and true mature devices, long-tested in millions of projects domestic and overseas since 1998! Don't hesitant to leave your any inquiry here!

Send email to us

Product Detail

Product Tags

Feedback (2)

We're committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for Alarms For Home, O2 Gas Monitor, Gas Detector Alarm For Home, We adhere on the tenet of "Services of Standardization, to meet Customers' Demands".

Factory Outlets Multi Gas Detector - GT-AEC2335 AC220V Powered Fixed Gas Detector – Action Detail:

Technical specifications

Item	Data
Detected gases	Natural gas, Propane
Principle of detection	Catalytic combustion
Sampling mode	Diffusive sampling
Detected range	(0~100)%LEL
Response time	≤12s
Operating voltage	AC176V~AC264V (50Hz±1%)
Power consumption	≤4W
Alarming mode	Buzzer alarming and indicator alarming
Protection grade	IP66
Explosion proof grade	ExdⅡCT6Gb
Service life of the sensor	Three years (typical)
Environmental condition for operating	Temperature: 0℃~+55℃; relative humidity: ≤93%; pressure: 86kPa~106kPa
Storage temperature	-20℃~+50℃
Outlet hole connecting thread	NPT3/4＂(female)

Product Parameter Characteristics

Detection principle	Catalytic combustion, Electrochemical	Signal transmission mode	A-BUS+、4-20mA、RS485
Sampling mode	Diffusive sampling	Alarm error	±3%LEL
Operating voltage	DC24V±6V	Indication error	±3%LEL（display on the connected gas alarm controller）
Display mode	Digital tube display	Sound and light configuration	Optional ACTION explosion-proof audible and visual alarm
Power consumption	＜3W（DC24V）	Signal transmission distance	≤1500m（2.5mm2 ）
Press range	86kPa～106kPa	Operating temperature	-40℃～＋70℃
Explosion proof grade	Catalytic combustion：ExdⅡCT6Gb/Ex tD A21 IP66 T85℃ (Explosion-proof + dust)Electrochemical：Ex d ib ⅡC T6 Gb/Ex t D ibD A21 IP66 T85℃(Explosion-proof + dust)	Humidity range	≤93%RH
Shell material	Cast aluminum	Protection grade	IP66
Electrical interface	NPT3/4＂internal thread

Major Features

● AEC220V power supply

This detector works while it is electrified (220V). The comprehensive cost is low. It has functions of controller + detector, as an independent system;

● Alarming mode

Audible-visual alarm: buzzer alarming and indicator alarming;

● Real-time concentration detection

Monitor combustible gases within the lower explosive limit in the industrial environment and give alarms;

● Linked output

Multiple output modes are available. The detector can link solenoid valves and fans, etc;

● Wireless transmission

GPRS communication modules are optional, used to send data to DRMP wirelessly. User can monitor equipment running statuses through a fixed terminal or a mobile terminal APP;

● High sensitivity

Automatic zero correction (to avoid zero wander that may cause a measurement error), automatic curve compensation, intelligent temperature and zero compensation algorithm (for better performance), low power consumption, two-point calibration, curve-fitting technique, high accuracy, stable performance and reliable sensitivity;

● IR remote control

An IR remote controller is used to set parameters;

● Application sites

Mini-sized industrial and commercial gas application sites in the urban fuel gas field.

Model Selection

Model

Signal output

Sensor equipped

Adaptive control system

GTY-AEC2335

NB-IoT or A-BUS+ bus signal

GPRS wireless remote transmission

DC12V capacity discharge + passive switching value

For other output types, please consult with the head office

Catalytic combustion

Bus controller

MSSP remote monitoring platform

Model Selection

1. Top cover component

2. Plastic supporting cover

3. Circuit board -1

4. Grounding screw

5. Bottom box

6. Outer cover of the gas collecting head

7. Gas collecting head

8. Circuit board -2

9. Nameplate

10. Horn component

11. Switching button

12. Mounting screw

13. Mounting hook

14. Seal ring

Boundary Dimension

Dimension: Length× width× height: 217mm×188mm×75.5mm

Mounting Mode

The detector should be wall-mounted. Please ensure that the detector is mounted firmly and reliably. The wall mounting mode is shown as below:

Product detail pictures:

Related Product Guide:

With reliable quality process, good reputation and perfect customer service, the series of products produced by our company are exported to many countries and regions for Factory Outlets Multi Gas Detector - GT-AEC2335 AC220V Powered Fixed Gas Detector – Action , The product will supply to all over the world, such as: Vietnam, Uzbekistan, Sheffield, The company has perfect management system and after-sales service system. We devote ourselves to building a pioneer in the filter industry. Our factory is willing to cooperate with different customers domestic and overseas to gain better and better future.

Co Gas Monitor