China H2s Gas Detector GT-AEC2335 AC220V Powered Fixed Gas Detector – Action manufacturers and suppliers

H2s Gas Detector GT-AEC2335 AC220V Powered Fixed Gas Detector – Action

Short Description:

ACTION gas detectors are OEM & ODM supported and true mature devices, long-tested in millions of projects domestic and overseas since 1998! Don't hesitant to leave your any inquiry here!

Send email to us

Product Detail

Product Tags

Feedback (2)

carry on to boost, to guarantee products excellent in line with market and consumer standard specifications. Our enterprise has a quality assurance system are actually established for Gas Detector System, Carbon Monoxide Gas Alarm, Gas Detector Machine, Should you be fascinated in any of our products and services, remember to do not hesitate to make contact with us. We're ready to reply you inside of 24 several hours soon after receipt of one's ask for and also to develop mutual un-limited advantages and organization in around potential.

H2s Gas Detector GT-AEC2335 AC220V Powered Fixed Gas Detector – Action Detail:

Technical specifications

Item	Data
Detected gases	Natural gas, Propane
Principle of detection	Catalytic combustion
Sampling mode	Diffusive sampling
Detected range	(0~100)%LEL
Response time	≤12s
Operating voltage	AC176V~AC264V (50Hz±1%)
Power consumption	≤4W
Alarming mode	Buzzer alarming and indicator alarming
Protection grade	IP66
Explosion proof grade	ExdⅡCT6Gb
Service life of the sensor	Three years (typical)
Environmental condition for operating	Temperature: 0℃~+55℃; relative humidity: ≤93%; pressure: 86kPa~106kPa
Storage temperature	-20℃~+50℃
Outlet hole connecting thread	NPT3/4＂(female)

Product Parameter Characteristics

Detection principle	Catalytic combustion, Electrochemical	Signal transmission mode	A-BUS+、4-20mA、RS485
Sampling mode	Diffusive sampling	Alarm error	±3%LEL
Operating voltage	DC24V±6V	Indication error	±3%LEL（display on the connected gas alarm controller）
Display mode	Digital tube display	Sound and light configuration	Optional ACTION explosion-proof audible and visual alarm
Power consumption	＜3W（DC24V）	Signal transmission distance	≤1500m（2.5mm2 ）
Press range	86kPa～106kPa	Operating temperature	-40℃～＋70℃
Explosion proof grade	Catalytic combustion：ExdⅡCT6Gb/Ex tD A21 IP66 T85℃ (Explosion-proof + dust)Electrochemical：Ex d ib ⅡC T6 Gb/Ex t D ibD A21 IP66 T85℃(Explosion-proof + dust)	Humidity range	≤93%RH
Shell material	Cast aluminum	Protection grade	IP66
Electrical interface	NPT3/4＂internal thread

Major Features

● AEC220V power supply

This detector works while it is electrified (220V). The comprehensive cost is low. It has functions of controller + detector, as an independent system;

● Alarming mode

Audible-visual alarm: buzzer alarming and indicator alarming;

● Real-time concentration detection

Monitor combustible gases within the lower explosive limit in the industrial environment and give alarms;

● Linked output

Multiple output modes are available. The detector can link solenoid valves and fans, etc;

● Wireless transmission

GPRS communication modules are optional, used to send data to DRMP wirelessly. User can monitor equipment running statuses through a fixed terminal or a mobile terminal APP;

● High sensitivity

Automatic zero correction (to avoid zero wander that may cause a measurement error), automatic curve compensation, intelligent temperature and zero compensation algorithm (for better performance), low power consumption, two-point calibration, curve-fitting technique, high accuracy, stable performance and reliable sensitivity;

● IR remote control

An IR remote controller is used to set parameters;

● Application sites

Mini-sized industrial and commercial gas application sites in the urban fuel gas field.

Model Selection

Model

Signal output

Sensor equipped

Adaptive control system

GTY-AEC2335

NB-IoT or A-BUS+ bus signal

GPRS wireless remote transmission

DC12V capacity discharge + passive switching value

For other output types, please consult with the head office

Catalytic combustion

Bus controller

MSSP remote monitoring platform

Model Selection

1. Top cover component

2. Plastic supporting cover

3. Circuit board -1

4. Grounding screw

5. Bottom box

6. Outer cover of the gas collecting head

7. Gas collecting head

8. Circuit board -2

9. Nameplate

10. Horn component

11. Switching button

12. Mounting screw

13. Mounting hook

14. Seal ring

Boundary Dimension

Dimension: Length× width× height: 217mm×188mm×75.5mm

Mounting Mode

The detector should be wall-mounted. Please ensure that the detector is mounted firmly and reliably. The wall mounting mode is shown as below:

Product detail pictures:

Related Product Guide:

Our products and solutions are greatly recognized and trustworthy by customers and may fulfill constantly changing financial and social requires for H2s Gas Detector GT-AEC2335 AC220V Powered Fixed Gas Detector – Action , The product will supply to all over the world, such as: Accra, Zimbabwe, Kuwait, As an experienced factory we also accept customized order and make it same as your picture or sample specifying specification and customer design packing. The main goal of the company is to live a satisfactory memory to all the customers,and establish a long term win-win business relationship. For more information,please contact us. And it's our great pleasure if you like to have a personally meeting in our office.

Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.

By Riva from Estonia - 2018.11.28 16:25

The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!

By John biddlestone from Karachi - 2018.12.05 13:53

Write your message here and send it to us