Wutar lantarki mai aiki | AC176V~AC264V (50Hz±1%) |
Amfanin wutar lantarki | ≤10W (ban da kayan tallafi) |
Yanayin muhalli don aiki | zazzabi-10 ℃ ~ + 50 ℃, dangi zafi≤93% RH |
watsa sigina | tsarin bas hudu (S1, S2, +24V da GND) |
Nisa watsa sigina | 1500m (2.5mm2) |
Nau'in iskar gas da aka gano | %LEL |
Iyawa | jimlar adadin masu ganowa da abubuwan shigarwa≤4 |
Kayan aiki masu dacewa | gas detectorGT-AEC2331a, GT-AEC2232a, GT-AEC2232bX/A |
Tsarin shigarwa | JB-MK-AEC2241 (d) |
Akwatunan haɗin fan | Saukewa: JB-ZX-AEC2252F |
Akwatunan haɗin bawul na Solenoid | Saukewa: JB-ZX-AEC2252B |
Fitowa | saiti biyu na siginar tuntuɓar sadarwa, tare da ƙarfin 3A/DC24V ko 1A/AC220V RS485Bus sadarwar sadarwa (ka'idar MODBUS) |
Saitin ƙararrawa | ƙaramar ƙararrawa da ƙararrawa mai girma |
Yanayi mai ban tsoro | ƙararrawa mai ji-na gani |
Yanayin nuni | nixi tube |
Girman iyaka(tsayi × nisa × kauri) | 320mm ×240mm ×90mm |
Yanayin hawa | bango-saka |
Wutar lantarki mai jiran aiki | DC12V /1.3Ah ×2 |
● watsa siginar bas, ƙarfin tsarin tsangwama mai ƙarfi, mai amfani da tsada mai tsada, shigarwa mai dacewa da inganci;
● Matsakaicin iskar gas na ainihi (% LEL) dubawa ko dubawa lokaci don zaɓin mai amfani;
● Maɓalli ɗaya na farawa don ƙaddamar da tsarin sauƙi da dacewa;
● Saita ƙimar ƙararrawa kyauta na matakan ban tsoro guda biyu a cikin kewayon sikelin;
● Gyara ta atomatik, da kuma ganowa ta atomatik na tsufa na firikwensin;
● Saka idanu gazawar ta atomatik; daidai nuna gazawar wuri da nau'in;
● Saituna biyu na tsarin fitarwa na haɗin kai na ciki da maɓallan gaggawa guda biyu don sarrafa kayan waje ta atomatik ko da hannu;
● Ƙarfi mai ƙarfi: bayanan tarihi na sababbin bayanan 999 masu ban tsoro, rikodin gazawar 100 da rikodin farawa / rufewa 100, waɗanda ba za a rasa ba idan akwai rashin ƙarfi;
● RS485 bas sadarwa (misali MODBUS yarjejeniya) dubawa don gane sadarwa tare da tsarin kula da runduna da kuma sadarwar tare da wuta da gas cibiyar sadarwa tsarin, don inganta tsarin hadewa.
1. Kulle gefe
2. Rufewa
3. Kaho
4. tashar tashar bas
5. RS485 hanyar sadarwa ta bas
6. Relay connection terminal
7. Akwatin gindi
8. Ramin mai shigowa
9. Tashar ƙasa
10. Tashar wutar lantarki
11. Canjawar babban wutar lantarki
12. Canjawar samar da wutar lantarki
13. Canja wutar lantarki
14. Lantarki na jiran aiki
15. Control panel
● Yi ramukan hawa 4 (zurfin rami: ≥40mm) a cikin bango kamar yadda buƙatun buƙatun ramuka na ƙasa (alamomin ramuka 1-4);
● Saka ƙulli na faɗaɗa filastik cikin kowane rami mai hawa;
● Gyara katako na ƙasa a kan bango, kuma ɗaure shi a kan ƙullun haɓakawa tare da 4 kai-tapping screws (ST3.5 × 32);
● Rataya sassan rataye walda a bayan mai sarrafawa zuwa wurin A a allon ƙasa don kammala hawan mai sarrafawa.
L,kuma N:AC220V wutar lantarki tashoshi
NC (yawan rufewa), COM (Na kowa) da NO (akan buɗewa):(saiti 2) tashoshin fitarwa don isar da saƙon sarrafa siginar fitarwa ta waje
S1, S2, GND da +24V:na'urorin haɗin bas na tsarin
A, PGND da B:RS485 hanyoyin haɗin haɗin sadarwa