samfur
Mai Kula da Ƙararrawar Gas AEC2392A
Ƙididdiga na Fasaha
| Abu | Bayanai |
| Katin samar da wutar lantarki | AC176V~AC264V (50Hz±1%) |
| Daidaitaccen tsari (hanyoyi 8) | Katin sarrafawa guda ɗaya, katin samar da wutar lantarki ɗaya, katunan tashoshi takwas da 19 '' daidaitaccen 3U rack guda ɗaya |
| Girman iyaka na ma'auni | tsawon × nisa × tsawo 450mm × 300mm × 132.5mm (ban da hannun hannu); 482mm × 344mm × 132.5mm (ciki har da hannun hannu) |
| Abu | Katin sarrafawa na Master | Katin tashar | |
| Wutar lantarki mai aiki | DC24V± 6V | ||
| Amfanin wutar lantarki | 3W | 0.5W / Katin Channel | |
| Yanayin muhalli don aiki | Zazzabi-10 ℃ ~ + 50 ℃; dangi zafi≤93% RH; matsa lamba na yanayi 86kPa ~ 106kPa | ||
| Sigina na shigarwa | Haɗa zuwa (4 ~ 20)mA daidaitattun sigina na yanzu ko siginar ƙima mai canzawa ta hanyar katin tashoshi | (4 ~ 20)mA daidaitattun sigina na yanzu ko siginonin ƙima mai canzawa | |
| Nisa watsa sigina | 1500m (1.5mm2) | ||
| Nau'in iskar gas da aka gano | %LEL/%VOL/ppm | ||
| Yanayin aiki | Yin aiki tare da katunan tashoshi | Haɗa zuwa babban katin sarrafawa ko aiki da kansa | |
| Iyawa | Haɗa katunan tashoshi takwas (ana iya faɗaɗawa zuwa maki 34) | Katin tashoshi ɗaya yana haɗa da'irar shigarwa ɗaya | |
| Kayan aiki masu dacewa | Mai gano gass: GT-Saukewa: GQ-AEC2232bX, GT-Saukewa: AEC2232Saukewa: AEC2338,GQ-AEC2232bX -Saukewa: AEC2338-DAkwatin haɗin fan: JB-ZX-AEC2252FSolenoid bawulAkwatin haɗin gwiwa: JB-ZX-AEC2252BFlame detectors, hayaki / zafi ganowa da manual ƙararrawa buttons, da dai sauransu | ||
| Sigina na fitarwa | 1. RS485 siginar sadarwar bas (misali MODBUS yarjejeniya);2. Sigina na saiti 2 na relays (raƙuwa da ƙararrawa); karfin lamba: AC220V/5A ko DC24V/5A | Katin tashoshi ɗaya na iya fitarwa:1. Saitin ɗaya na (4~20)mA na yanzu;2. Sigina na 3 sets na relays (babban ƙararrawa, ƙaramin ƙararrawa da gazawa); karfin lamba: AC220V/5A ko DC24V/5A | |
| Saitin ƙararrawa | Ƙananan ƙararrawa da ƙararrawa mai girma | ƙaramar ƙararrawa da ƙararrawa mai girma | |
| Yanayi mai ban tsoro | Ƙararrawa mai ji-na gani | Ƙararrawar gani | |
| Yanayin nuni | Nunin LCD na Sinanci | LED dijital nuni | |
| Yanayin hawa | Standard 19" Cabinets panel hawa | ||
| Na zaɓi | Lantarki na jiran aiki DC12V/7Ah×2 baturin gubar-acid (harka na waje) | ||
| Farantin makafi | tsawo × nisa: 129.5mm × 35.2mm | ||
Manyan Siffofin
● Ƙarfe na 19" daidaitaccen tsari na 3U wanda aka ɗora da duk wani tsarin ƙarfe zai iya hana tsangwama na EMI/RFI. Saboda ƙirar kati mai zaman kanta, katunan tashoshi na zaɓi, katunan sarrafawa da katunan samar da wutar lantarki ana iya amfani da su kamar yadda ake buƙata don saita tashoshi.tsarin kula da iskar gastare da har zuwa wuraren maki 1,000;
● Katin kula da maigida yana da alamar nunin Sinanci na LCD da aikin menu na hali. Yana iya saka idanu akan tsarin tsarin, ƙararrawa da matsayi na gazawar. Hakanan ana iya amfani dashi don saitawa da bincika sigogi daban-daban. Yana iya saita lokacin tsarin, kewayon (% LEL, ppm da% VOL), nau'ikan ƙararrawa guda uku, ƙaddamarwar ƙararrawa, kalmar sirri, da izinin aiki da bincika har zuwa ƙararrawa 999 da rikodin gazawar da 100 farawa / bayanan rufewa;
● Mai kula da kati na RS485 na sadarwar bas na bas, sanye take da daidaitaccen ka'idar MODBUS, na iya sadarwa tare da tsarin sarrafa rundunar da haɗa wuta datsarin gass don inganta matakin haɗin tsarin;
● Katunan tashoshi na iya karɓar siginar 4-20mA ko shigar da siginar ƙimar ƙimar kuma a haɗa su da na'urori daban-daban, gami daiskar gas mai ƙonewas, mai guba da haɗari mai gano iskar gass, oxygen ganes.
● Tare da daidaiton nuni na LED na 0.000-9999, katunan tashoshi na iya saka idanu kan ƙaddamar da kayan aiki na waje, ƙararrawa da gazawar matsayi a kan ainihin lokaci kuma sadarwa tare da katin kula da maigidan. Katunan tashoshi kuma suna iya aiki da kansu kuma a yi amfani dasu don saita sigogi na ganowa. Don haka, gazawar katin kula da maigidan ko gazawar sauran katunan tashoshi ba zai yi tasiri kan saka idanu na katunan tashoshi ba;
● Katunan tashoshi 'nau'in fitarwa da yawa sun dace da haɗin kai na na'urorin sarrafa waje daban-daban na kan-site, mai kyau don haɗawa da tsarin sarrafa rundunar;
● Katin wutar lantarki yana ba da wutar lantarki na DC24V zuwa na'urori na ciki na kwamfutar mai watsa shiri da na'urorin da ke kan yanar gizo (idan yana da girma, yi amfani da wutar lantarki na musamman na kashe wuta).
Tsarin
1.19" daidaitaccen 3U tara
2. 4 × φ7.5 rami mai hawa
3. Hannu
4. Katin tashar
5. Katin tashar LED taga
6. Kulle
7. Kulle mai kunna wutar lantarki na jiran aiki
8. Kulle maɓalli na babban wutar lantarki
9. Katin samar da wutar lantarki
10. Katin kula da Jagora
11. Master iko katin LCD panel
Tsarin Waya
Tashoshin haɗi:
Katin sarrafawa na babban gida:
NO (wanda aka saba buɗewa) da COM (na kowa):(saiti 2) tashoshin fitarwa don isar da saƙon sarrafa siginar fitarwa ta waje
A+, PGND da B-:RS485 hanyoyin haɗin haɗin sadarwa
Katin samar da wutar lantarki:
L, PE da N:AC220V wutar lantarki tashoshi
B+ da GND: hanyoyin haɗin haɗin wutar lantarki na jiran aiki
Katin tashar:
F1+ da F2-:tashoshin haɗin kai don fitarwar siginar gudun ba da sanda idan mai ganowa ya yi kuskure
LA1+ da LA2-:tashoshin haɗin kai don fitowar siginar na'ura idan mai ganowa ya ba da ƙaramar ƙararrawa
HA1+ da HA2-:tashoshin haɗin kai don fitowar siginar na'urar idan mai ganowa ya ba da ƙararrawa mai girma
GND da 4 ~ 20mA (FITA):(4 ~ 20) mA siginar fitarwa tashoshi
GND, 4 ~ 20mA (IN) da +24V:tashoshi na shigarwa don (4 ~ 20) mA ko siginar ƙima mai canzawa
Tashar ta ciki: babu aiki da ake buƙata
B kumaA: Tashoshin haɗi don sadarwa na ciki
GND da 24V-IN:Tashar wutar lantarki ta DC24
