banenr

product

  • BT-AEC2383b Portable Single Gas Detector

    BT-AEC2383b Portable Single Gas Detector

    It is a portable gas detector suitable for gas patrol inspection and household operation. It is small and convenient for staff to carry. There are two air inlet modes: diffusion type and pump type. Combined with gooseneck design, it can easily detect gas leakage in confined space.

    Welcome to click the Inquiry button to obtain the free samples!

  • GT-AEC2232bX-p Fixed Gas Detector

    GT-AEC2232bX-p Fixed Gas Detector

    Patented compound PID joint detection technology

    In order to improve the life of the PID sensor, an innovative mode of dual-sensor joint operation is adopted. The semiconductor detection signal is used as the starting signal of the PID detector to reduce the working time of the PID sensor, so the service life of the PID sensor can be greatly improved (2-5 years);

    Patented rainproof and dustproof technology

    The new multi-purpose rainproof and dustproof cover gives consideration to rain and dust prevention. It can effectively filter 99% impurities and reduce the blocking probability of pumping device;

  • AEC2323 Explosion-proof Audible-visual Alarm

    AEC2323 Explosion-proof Audible-visual Alarm

    The AEC2323 explosion-proof audible-visual alarm is a small audible-visual alarm applicable to zone-1 and 2 hazardous areas and class-IIA, IIB, IIC explosive gas environment with a temperature class of T1-T6.

    The product has a stainless steel enclosure and a red PC lampshade. It is characterized by high intensity, impact resistantance, and high explosion-proof grade. Its LED luminescent tube is characterized by highlight, long service life and non-maintenance. With a G3/4’’ pipe thread (male) electrical interface design, it is easier to be connected to other devices to give audible-visual alarms at dangerous sites.

    Welcome to click the Inquiry button to obtain the free samples!

  • AEC2232bX Series Toxic & Combustible Gas Detector

    AEC2232bX Series Toxic & Combustible Gas Detector

    This series of detectors adopts integrated functional module design, which is convenient for on-site hot swapping and replacement. It can be equipped with various types of sensors, such as catalytic sensor, semiconductor sensor, electrochemical sensor, infrared (IR) sensor, photoion (PID) sensor, etc. and can detect various toxic and combustible gas concentrations (ppm /% LEL /% VOL) on site. The detector has the characteristics of flexible combination, quick and easy replacement, stable performance, good consistency, high sensitivity, low power consumption, multiple outputs and optional detection methods. It is widely used in petroleum, chemical industry, pharmacy, steel, special industrial plants and other places with combustible or toxic and harmful gases.

    Welcome to click the Inquiry button to obtain the free samples!

  • Gas Alarm Controller AEC2393a

    Gas Alarm Controller AEC2393a

    The 19” standard 3U panel-mounted all-metal rack has a slideway plug-in design in each channel; the standard 3U cabinet installation is characterized by easy installation, small volume (73% of AEC2392a) and anti-EMI/RFI interference;

    The master control card and channel cards are set separately but have a function of synchronous display. With a large LCD Chinese display screen, the master control card can realize Chinese menu operation as well as faster and easier display and operation;

    Channel cards can work independently under an independent menu. Thus, failure of the master control card or failure of other channel cards will not have an impact on normal channel cards’ gas monitoring;

    Channel cards can receive 4-20mA signal or switching value signal input and be connected with various devices, including combustible gas detectors, toxic and hazardous gas detectors, oxygen detectors, flame detectors, smoke/heat detectors and manual alarming buttones, etc.;

  • DT-AEC2531 Combustible Gas Monitoring Device for Underground Well Room

    DT-AEC2531 Combustible Gas Monitoring Device for Underground Well Room

    In the process of using natural gas, various equipment and devices such as pipelines, gate stations, pressure regulating equipment, valve wells, etc. are involved. These complicated gas supply equipment and pipe networks have brought many problems to the management of gas companies, especially the management of gas valve wells. Gas valve wells can cause gas leakage due to equipment aging, faults, and improper operation of personnel. However, traditional manual inspections are difficult to rush to the site for effective treatment in the first time due to the inspection density and inspection effect. All these have brought challenges to the management of gas companies.

  • GT-AEC2331a Industrial and commercial combustible gas detector

    GT-AEC2331a Industrial and commercial combustible gas detector

    High intelligence and digitalization

    High-performance micro-controller technology, automatic failure identification and automatic alarm, high-concentration gas over limit protection;

    Only one ESN. No code dialing is required, reducing the complexity of manual code dialing;

    Sensitivity curve attenuation compensation

    Advanced embedded software treatment technology, automatic service life attenuation compensation and high sensitivity;

  • GTY-AEC2335 AC220V Powered Fixed Gas Detector

    GTY-AEC2335 AC220V Powered Fixed Gas Detector

    AEC220V power supply

    This detector works while it is electrified (220V). The comprehensive cost is low. It has functions of controller + detector, as an independent system;

    Alarming mode

    Audible-visual alarm: buzzer alarming and indicator alarming;

    Real-time concentration detection

    Monitor combustible gases within the lower explosive limit in the industrial environment and give alarms;

    Welcome to click the Inquiry button to obtain the free samples!

  • JT-AEC2363a Household Combustible Gas Detector

    JT-AEC2363a Household Combustible Gas Detector

    A simple and classic household gas alarm with simple functions and focus. It is used to monitor gas leaks in the kitchen. High cost performance, can meet the group’s large-scale centralized purchase, reduce management costs, and is suitable for agents pursuing high profits.

    Welcome to click the Inquiry button to obtain the free samples!

  • GT-AEC2338 Fixed Gas Detector

    GT-AEC2338 Fixed Gas Detector

    Highly-integrated functional module design

    The integrated functional module is made up of two parts, i.e. detector module and sensor module. Anti-misplug standard digital interface is used between the two modules, good for on-site hot plug replacement;

    Alarm concentration can be set freely within the full range

    Low alarm concentration and high alarm concentration can be set freely within the full range. As keys are used for calibration, the calibrated value can be set according to calibrated gas concentration. Concentration is displayed through LCD on a real-time basis. On-site calibration can also be perfomed with an IR remote controller. At the time of calibration, it is unnecessary to open the cover. The operation is easy and convenient;

    Welcome to click the Inquiry button to obtain the free samples!

  • Z0.9TZ-15 Pipeline Gas Self-closing Valve

    Z0.9TZ-15 Pipeline Gas Self-closing Valve

    Pipeline gas self-closing valve is an installation device installed at the end of indoor low-pressure gas pipeline and connected to indoor gas appliances through rubber hoses or metal bellows. When the gas pressure in the pipeline is lower or higher than the setting value, or when the hose is broken, falling off and causing loss of pressure, it can be automatically closed in time to prevent accidents. Manual reset is required after troubleshooting.

    Welcome to click the Inquiry button to obtain the free samples!

  • GT-AEC2536 cloud bench laser methane detector

    GT-AEC2536 cloud bench laser methane detector

    Cloud laser methane detector is a new generation of equipment integrating explosion-proof monitoring and gas detection. It can monitor the methane gas concentration around the station for a long time, automatically, visually and remotely, and store and analyze the concentration data obtained from the monitoring. When the abnormal methane gas concentration or change trend is detected, the system will give a warning, managers generally need to take the prepared plan to deal with it.

    Welcome to click the Inquiry button to obtain the free samples!